•Brand: IZ Fog
•Model: IZ-150AS
•Main Specifications:
Operating power:18.9 kW / 25.7 hp / 16,500 Kcal/h.
Length:1,200 mm – Width: 270 mm – Height: 335 mm.
Weight:8.5 kg.
Battery voltage:DC 6V.
Chemical tank capacity:7 L.
Fuel tank capacity:1.5 L.
Fuel consumption:1.5 L/h.
Chemical spraying quantity:20 L/h – 60 L/h.
Cooling system:Air-cooled.
Particle size:5–30 microns.
•Product Features:
Dual-purpose use (water-based and oil-based solutions).
High performance and lightweight.
Easy to operate and maintain.
Combustion pipe made from special stainless-steel alloy resistant to heat and corrosion.
In-house manufactured engine with excellent power output.
Suitable for use in factories, public places, and residential areas.
Newly developed system ensures ultra-fine particle spraying of 5–30 microns.
•User Manual Summary (According to Components):
Fill the fuel tank with gasoline up to 80% of its capacity.
Fill the chemical tank with the required amount only (diesel + chemical according to the specified ratio) up to 80% of its capacity (approximately 6 L).
Press the start button for 2–3 seconds.
When the engine makes a sound and fuel rises to the nozzle, the device starts operating.
•If the device does not start:
Press the air pin located on the fuel tank cap.
Press the start button several times to discharge excess fuel.
Close the air pin and try again.
After preheating for 10 seconds, open the chemical valve and control valve to start fogging.
•After finishing usage:
Close the chemical valve first.
Ensure that the chemical flow has completely stopped.
Press the air button, then turn off the engine.
After switching off the device, open the chemical tank cap to release pressure.
•If the engine stops during spraying:
This may cause ignition inside the spraying pipe.
Immediately close the chemical valve.
Press the start button to restart the engine.
Extinguish the fire once normal operation resumes.
